uCsimm Archive
By Subject
2529 messages sorted by:
[ author ]
[ date ]
[ thread ]
[ attachment ]
About this archive
Other mail archives
Starting: Sat Jan 01 2000 - 20:12:36 EST
Ending: Fri Apr 26 2002 - 04:18:21 EDT
- (holiday)
- (no subject)
- 32-bit PIC patches for the uCsimm !
- [[uCsimm] boot problems]
- [[uCsimm] question on running ucsimm]
- [[uCsimm] question on running ucsimm]]
- [gnucsimm] ATA drive interface
- [gnucsimm] Power supply blues
- [uClinux + uCsimm] Mailing List Archives
- [uClinux-dev] Missing 0x10 in incoming serial stream
- [uClinux-dev] New CVS mailing list
- [uClinux-dev] uC-libc malloc-simple memory leak patch
- [uClinux-dev] uClinux 2.4.0.0pre0 released.
- [uClinux-dev] unable to open initial console
- [UCLINUX] [uCsimm] uClinux-2.0.38.1pre4 hits the wire...
- [UCLINUX] Assembler oddities
- [UCLINUX] BIIIIG conceptual problem with ucLinux
- [UCLINUX] Development of Dragonball - Coldfire board for ucLinux
- [UCLINUX] gcc PIC 32bit RPM
- [UCLINUX] MMU
- [UCLINUX] more serial lines & 100BASE-T ethernet
- [UCLINUX] Power supply blues
- [UCLINUX] proxy arp seems broken to me
- [UCLINUX] uClinux 2.2 or 2.4?
- [UCLINUX] uclinux paging
- [UCLINUX] yet another relocation truncation
- [UCLINUX]: User Space Application
- [uCsimm]
- [uCsimm] 'eth0:using...' opening message
- [uCsimm] (no subject)
- [uCsimm] 1 bit LCD issue
- [uCsimm] 115Kbaud Download fails because.... Add to FAQ's
- [uCsimm] 125 micro second latency - REALTIME?
- [uCsimm] 2.0.38.1pre5
- [uCsimm] 3.3 volt LCd
- [uCsimm] 30 pin SIMM availability
- [uCsimm] 32-bit PIC patches
- [uCsimm] 32-bit PIC patches for the uCsimm !
- [uCsimm] 32k code size limitation
- [uCsimm] 68EZ328 kernel + development for 2.4 available.
- [uCsimm] 68EZ328 Speed
- [uCsimm] [Fwd: m68k-pic32, adding _cleanup to libc]
- [uCsimm] [Fwd: uCsimm information]
- [uCsimm] [UCLINUX] Why linux-2.0.38, low-latency patches?
- [uCsimm] [UCLINUX]: User Space Application
- [uCsimm] [uscimm] Motorola Dragonball ADS Board LCD
- [uCsimm] __do_global_ctors_aux
- [uCsimm] A Few More Openings #2014
- [uCsimm] a fool question
- [uCsimm] A new linux baby is born
- [uCsimm] A possible use of the uCsimm
- [uCsimm] A problem from a new user.
- [uCsimm] a question about SLIP
- [uCsimm] A stupid question.. :)
- [uCsimm] a web browser for uCsimm ?
- [uCsimm] A: How to free the General Purpose Timer
- [uCsimm] About /dev/ttyS0
- [uCsimm] about 32-bit PIC
- [uCsimm] About spam...
- [uCsimm] about uCLinux and xcopilot
- [uCsimm] About uCsimm??help!help!
- [uCsimm] about VZ328ads help me !
- [uCsimm] Adding m68k-elf support to the uCdimm
- [uCsimm] ADS and uClinux
- [uCsimm] ADS for VZ328
- [uCsimm] Alert about how domain names are changing
- [uCsimm] All this talk about serial pinouts...
- [uCsimm] ALPS Display LHRDD101xA and uCSIMM ?
- [uCsimm] another note for RT-uClinux
- [uCsimm] Any PCB design software ... which is GNU or freewar e.
- [uCsimm] Any PCB design software ... which is GNU or freeware.
- [uCsimm] Any PCB design software ... which is GNU or freeware. (fwd)
- [uCsimm] Anybody working with ARM port?
- [uCsimm] apparent memory leak in stdio
- [uCsimm] applications for ucsimm
- [uCsimm] Archive broken
- [uCsimm] Are the uCsimm I/O pins 5V Tolerant?
- [uCsimm] ARM port
- [uCsimm] arm-uclinux
- [uCsimm] ARM7TDMI
- [uCsimm] Assembler code problems with uCsimm C compiler
- [uCsimm] Assembler oddities
- [uCsimm] ATA drive interface
- [uCsimm] AUI port on cs8900
- [uCsimm] Availability
- [uCsimm] Available LCD Epson EG9013
- [uCsimm] Axis source code available now, including a Bluetooth driver for Li nux
- [uCsimm] Axis source code available now, including a Bluetooth driver for Linux
- [uCsimm] Axis source code available now, including a Bluetoothdriver for Linux
- [uCsimm] Bad MC68EZ328.h entry
- [uCsimm] Battery Backup RTC
- [uCsimm] BDM sources
- [uCsimm] Best Rates in Years #69C1
- [uCsimm] big hit at FOSE, Wash., DC
- [uCsimm] BIIIIG conceptual problem with ucLinux
- [uCsimm] Bluetoothing?
- [uCsimm] BOA - browser memory problem
- [uCsimm] BOA - browser problem
- [uCsimm] Boa and cgi?
- [uCsimm] BOA and CGIs
- [uCsimm] Boa with CGI
- [uCsimm] Boa with CGI again
- [uCsimm] Boardlayout uCSimm
- [uCsimm] bogus interrupts on IRQ3?
- [uCsimm] boot console problem
- [uCsimm] Boot EEPROM codes
- [uCsimm] boot problems
- [uCsimm] boot problems]
- [uCsimm] Boot ROM
- [uCsimm] booting messages of the ucsimm
- [uCsimm] Bootloader
- [uCsimm] Bootloader environment variables
- [uCsimm] Bootloader hangs, Solution!
- [uCsimm] Bootloader Problem
- [uCsimm] BOUNCE ucsimm@uClinux.com: Admin request of type /^s ub\b/i at line 9
- [uCsimm] BOUNCE ucsimm@uClinux.com: Admin request of type /^sub\b/i at line 9
- [uCsimm] Breaking the workload.
- [uCsimm] Bug on UART
- [uCsimm] BUG()
- [uCsimm] Built 2.4 but booting gives Attempted to kill init
- [uCsimm] Bus-CAN on uCsimm
- [uCsimm] Busobox 0.48
- [ucsimm] busybox
- [uCsimm] BusyBox?
- [uCsimm] Buying used ucsimm's
- [uCsimm] Calling all uCLinux guys
- [uCsimm] camera for ucsimm
- [uCsimm] can no longer list processes (ps) after patching with uClinux-2.0.3 8.1pre7.diff
- [uCsimm] Can syslog and other console output be redirected to a log file on ramdisk?
- [uCsimm] Can syslog and other console output be redirected to a log file onramdisk?
- [uCsimm] can't mount with RedHat 6.0
- [uCsimm] Can't receive any mail from uCsimm
- [uCsimm] Can't run kernel after 'make menuconfig'?
- [uCsimm] cat and telnet performance problems
- [uCsimm] CGI problem
- [uCsimm] Change of the ucsimm flash
- [uCsimm] Change password on uClinux
- [uCsimm] Changing special environment variables?
- [uCsimm] Cisco 0.1
- [uCsimm] Color display
- [uCsimm] Communication via modem
- [uCsimm] Compact Flash
- [uCsimm] Compact Flash, wiring for IDE
- [uCsimm] compatibility with a LCD
- [uCsimm] Compilation failure
- [uCsimm] compilation problem
- [uCsimm] Compilation problems
- [uCsimm] compiled program with elf-gcc doesn't work
- [uCsimm] Complete Box, ready to go???
- [uCsimm] Comport uC68EZ328 (pppd)
- [uCsimm] Configuring and running programs
- [uCsimm] Connecting an EG9013 to the uCsimm
- [uCsimm] Connecting to Internet via ucsimm
- [uCsimm] counter/timer
- [uCsimm] crap... revise that. :-)
- [uCsimm] Create a new ram file system.
- [uCsimm] Creating Ram FS
- [uCsimm] Crystal Lan on 2.0.38.1.perl5 problem, pls help
- [uCsimm] cs8900 & wait-states
- [uCsimm] CS8900 + no cable patch?
- [uCsimm] CS8900 Chip Selection
- [uCsimm] CS8900 memory addresses in net/uCcs8900.c question
- [uCsimm] CS8900 problem
- [uCsimm] CS8900 reference schematic?
- [uCsimm] Current: Kernel & Libraries
- [uCsimm] CVS compile
- [uCsimm] Cycle Time of EZ328?
- [uCsimm] Data Loop-back
- [uCsimm] date and cal commands (repost)
- [uCsimm] date and cal commands - [was] User program sources?
- [uCsimm] date and getbenv()
- [uCsimm] Date: Fri, 2 Mar 2001 23:05:40 -0300
- [uCsimm] Date: Mon, 19 Mar 2001 11:21:21 +0100
- [uCsimm] Date: Mon, 5 Mar 2001 08:24:07 +0200
- [uCsimm] Date: Mon, 5 Mar 2001 12:15:37 +0100
- [uCsimm] Date: Sat, 24 Mar 2001 12:26:19 +0800
- [uCsimm] Date: Sat, 3 Mar 2001 12:13:43 +0800
- [uCsimm] Date: Sat, 3 Mar 2001 13:04:34 +0800
- [uCsimm] Date: Sun, 4 Mar 2001 02:01:33 -0800
- [uCsimm] Date: Tue, 13 Mar 2001 10:31:40 -0500
- [uCsimm] Date: Tue, 20 Mar 2001 08:40:28 +0100
- [uCsimm] Date: Wed, 26 Apr 2000 08:44:33 +0100
- [uCsimm] debugging with GDB
- [uCsimm] debugging with GDB :: Trouble building gdbserver
- [uCsimm] debugging with GDB-- Trouble running gdbserver
- [uCsimm] Design fault with uCsimm.
- [uCsimm] Dev dir dups.
- [uCsimm] Development of Dragonball - Coldfire board for ucLinux
- [uCsimm] DHCPCD - help, where to find
- [uCsimm] Digital Cam...
- [uCsimm] DLE and DC2 characters are not transparent on serial driver
- [uCsimm] DLE and DC2 characters are not transparent on serialdriver
- [uCsimm] Doc
- [uCsimm] Docu for an Interrupthandler
- [uCsimm] Documentation
- [uCsimm] Downloading kernel via e-net?
- [uCsimm] DPC0105
- [uCsimm] Dragonball 68EZ328ADS rom debug monitor
- [uCsimm] Dragonball on TV
- [uCsimm] DRAM for 68VZ328
- [uCsimm] DRAM question
- [uCsimm] dratliff
- [uCsimm] dratliff@voyageursw.com
- [uCsimm] driver for an old MC2681 UART ?
- [uCsimm] EG9013
- [uCsimm] electrical caracteristics
- [uCsimm] Environment Variables
- [uCsimm] Epson LCD for the uCsimm
- [uCsimm] Error in asm/MC68EZ328.h
- [uCsimm] ESC in san jose
- [uCsimm] eth circuits: are there 100mbit circuits too?
- [uCsimm] ethernet connectivity problem
- [uCsimm] ethernet connectivity problem]
- [uCsimm] ethernet connectivity problem]]
- [uCsimm] Ethernet Controller IC
- [uCsimm] Ethernet Not Always Detected
- [uCsimm] ethernet packets
- [uCsimm] Every program its own copy of libc ?
- [uCsimm] Exact clock value
- [uCsimm] Example Code
- [uCsimm] Falling Rates #16F3
- [uCsimm] Fastest way to get communication with a database!
- [uCsimm] Fifos in Frank example
- [uCsimm] file creation on RAM disk
- [uCsimm] filesystem buffering
- [uCsimm] Finding LCD + Touchscreen for uCsimm
- [uCsimm] finepitch SMD soldering
- [uCsimm] Fire fighting robot that runs uClinux!
- [uCsimm] Fix for genromfs
- [uCsimm] Flash
- [uCsimm] Flash availability
- [uCsimm] flash file systems
- [uCsimm] Flash FS
- [uCsimm] flash memory
- [uCsimm] Flash problem
- [uCsimm] Flash programming
- [uCsimm] FLASH questions
- [uCsimm] Flashing big images
- [uCsimm] Floating point on uClinux?
- [uCsimm] FM radio receiver
- [uCsimm] For exact date
- [uCsimm] fork () / vfork ()
- [uCsimm] fprintf crashes
- [uCsimm] Frank example
- [uCsimm] FREE Biotech Stock Info! 144
- [uCsimm] Fried uCSimm?
- [uCsimm] FS on FLASH
- [uCsimm] FTP client
- [uCsimm] Fwd: snmpd
- [uCsimm] FYI: Minix Commands now available
- [uCsimm] g++ and uClinux/uCsimm
- [uCsimm] g++ instructions or binaries
- [uCsimm] G-Kermit
- [uCsimm] Gameboy Camera
- [uCsimm] gcc PIC 32bit RPM
- [uCsimm] GDB host/target debug
- [uCsimm] GDB interface.
- [uCsimm] GDB remote debugging on Red Hat linux
- [uCsimm] gdb/gdbserver
- [uCsimm] gdb/gdbserver...
- [uCsimm] gdbserver
- [uCsimm] gdbserver for uClinux on 68EZ328
- [uCsimm] gdbserver problem !!!
- [uCsimm] gdbserver weirdness
- [uCsimm] General memory problem
- [uCsimm] Generic IO Ports
- [uCsimm] genromfs patches
- [uCsimm] Gerber data available.
- [uCsimm] getting ethernet address
- [uCsimm] getting off the list
- [uCsimm] Getting started?
- [uCsimm] Getting trouble using minicom
- [uCsimm] GNU Java compiler libgcj ported?
- [uCsimm] go ram
- [uCsimm] goramfix and boot problem
- [uCsimm] GSM modem on uCsimm
- [uCsimm] GUI code snapshot
- [uCsimm] GUI for uClinux
- [uCsimm] Hacking the Palm IIIe?
- [uCsimm] Hacking the Palm IIIe?/ Off topic
- [uCsimm] Handwriting recognition
- [uCsimm] Hard Real time Linux
- [uCsimm] Has anyone implemented SmartMedia support?
- [uCsimm] Hello
- [uCsimm] Hi all
- [uCsimm] Hickups on uClinux-dev mailing list
- [uCsimm] Himemloader for uCimm
- [uCsimm] HomePNA to ucsimm?
- [uCsimm] How can I boot my kernel from the flash
- [uCsimm] How can I compile kernel properly?
- [uCsimm] How open source will Kiwi be?
- [uCsimm] How to add a device in romdisk/@dev?
- [uCsimm] How to communicate with mySQL server?
- [uCsimm] How to Connect uCsimm to internet with a modem?
- [uCsimm] How to create an iamge FROM ROM
- [uCsimm] how to make ucsimm LCD display char
- [uCsimm] how to make ucsimm LCD working
- [uCsimm] How to order ucsimm board and gardener kit in europe. ?
- [uCsimm] HOW TO REMOVE YOURSELF FROM THE MAILING LIST
- [uCsimm] how to upload a program without kernel?
- [uCsimm] how to use tcpdump in uclinux?
- [uCsimm] Howto...
- [uCsimm] HTTP flashloader
- [uCsimm] http://www.uclinux.org/pub/uCsimm/archive/
- [uCsimm] HV capacitors on the LAN transformer
- [uCsimm] I can't see 'booting process' in minicom
- [uCsimm] i/o pin count
- [uCsimm] I2C
- [uCsimm] I2C bus pinouts
- [uCsimm] IDE followup
- [uCsimm] IDE interface?
- [uCsimm] Implementing updateable ramdisk
- [uCsimm] Improved Xcopilot: one "XCOPILOT_BUGS" obsoleted
- [uCsimm] Inductors' Issue of Switching Power Supply
- [uCsimm] information
- [uCsimm] Infrared
- [uCsimm] Init.b and /CSB
- [uCsimm] Interesting uClinux sh problems
- [uCsimm] Interfacing 8bit sram on a 16bit bus
- [uCsimm] Interfacing and ATA or ATAPI device to the UCSimm
- [uCsimm] interrupt
- [uCsimm] Interrupt latency
- [uCsimm] Interrupt processing
- [uCsimm] Interrupt Service Routines
- [uCsimm] Interrupts & ColdFire
- [uCsimm] Interrupts and RTLinux
- [uCsimm] interrupts in uClinux
- [uCsimm] irq level 6 and higher
- [uCsimm] IRQ on port PD0
- [uCsimm] IRQ6 on uCsimm
- [uCsimm] Is anybody out there...
- [uCsimm] Is it me, or are there really 2 copies of each dev in /dev?
- [uCsimm] Is the FAT filesystem working?
- [uCsimm] Is the UcSimm Motherboard still available?
- [uCsimm] Is there any archive ?
- [uCsimm] Is this still working
- [uCsimm] Is ucSimm CD available for download
- [uCsimm] Java KVM on uCSimm
- [uCsimm] Java(waba) and Python
- [uCsimm] jffs
- [uCsimm] Kernel 2.0.38 Diff 7
- [uCsimm] Kernel compilation & linux.bin
- [uCsimm] kernel module linked dynamically
- [uCsimm] Kernel module support
- [uCsimm] Kiwi web pages up
- [uCsimm] kmalloc return
- [uCsimm] KVM on a uCsimm ?
- [uCsimm] KVM Porting on ucSimm
- [uCsimm] Latest release of the m68k-elf-tools
- [uCsimm] latest uClinux/src
- [uCsimm] LCD
- [uCsimm] LCD connected, now what ???
- [uCsimm] LCD connections
- [uCsimm] lcd display
- [uCsimm] LCD Display on EZADS board
- [uCsimm] LCD Epson EG9013
- [uCsimm] LCD Framebuffer
- [uCsimm] LCD issues
- [uCsimm] LCD issues (cheapest)
- [uCsimm] LCD question and update
- [uCsimm] LCD software question
- [uCsimm] lcd timing registers
- [uCsimm] LCD weirdness
- [uCsimm] lcd, framebuffer,...
- [uCsimm] LCDs and 20Mhz clock rate
- [uCsimm] lib scrt0.o
- [uCsimm] libc Problem with Suse 7.2 and uClinux CD
- [uCsimm] Licensing Cost
- [uCsimm] Lineo 68360 board
- [uCsimm] Linux drivers for web cams
- [uCsimm] Linux on a chip?
- [uCsimm] Linux PLC Project
- [uCsimm] Linux World Booth 874
- [uCsimm] Linux!!!
- [uCsimm] linux/uClinux emulator
- [uCsimm] lissa on epson lcd: succes!
- [uCsimm] list archive?
- [uCsimm] lists confusion
- [uCsimm] little help ...
- [uCsimm] LM32019 LCD connector
- [uCsimm] loading uc
- [uCsimm] login problem
- [uCsimm] Login Problem (Telnet)
- [uCsimm] Look what I have found !!!!!! Yat An Other 68VZ328 B OARD !!!
- [uCsimm] Look what I have found !!!!!! Yat An Other 68VZ328 BOARD !!!
- [uCsimm] Looking for a 16 bit PIO
- [uCsimm] M68k ELF tools update
- [uCsimm] M68K gcc build woes...
- [uCsimm] m68k-pic-coff 32k app size limit issue
- [uCsimm] m68k-pic-coff assembler error
- [uCsimm] m68k-pic32, adding _cleanup to libc
- [uCsimm] MAC OS
- [uCsimm] mail list archives.
- [uCsimm] Mailing List Archives
- [uCsimm] Mailing lists administration
- [uCsimm] Managed to get the power supply wrong. What next. . .
- [uCsimm] MC68EZ328
- [uCsimm] MC68EZ328 chips.
- [uCsimm] MC68EZ328PU16V available.
- [uCsimm] MC68VZ328
- [uCsimm] Memory leak
- [uCsimm] Memory leak caused by fopen
- [uCsimm] Memory leaks
- [uCsimm] Minicom again!
- [uCsimm] minicom and suse 7.0
- [uCsimm] minicom and suse 7.0 - SUCCESS !!
- [uCsimm] minicom upload takes forever
- [uCsimm] miniLinux and Announcing an Industrial I/O board for uCsimm
- [uCsimm] miniLinux and Announcing an Industrial I/O board foruCsimm
- [uCsimm] miniLinux.
- [uCsimm] Minor progresses on CS8900 driver for uCsimm
- [uCsimm] Missing 0x10 in incoming serial stream
- [uCsimm] Missing Part
- [uCsimm] Modem Dialup
- [uCsimm] Modifying and building the uCLinux kernel.
- [uCsimm] modules
- [uCsimm] more on atmel linux.
- [uCsimm] more serial lines & 100BASE-T ethernet
- [uCsimm] Motorola Dragonball ADS Board LCD
- [uCsimm] Motorola S-record Format
- [uCsimm] Mount problems
- [uCsimm] MP3
- [uCsimm] mp3 multicast client
- [uCsimm] MP3's
- [uCsimm] mp3-player with uclinux
- [uCsimm] MPEG player part 3
- [uCsimm] MTD and uCSimm
- [uCsimm] mysql/odbc client
- [uCsimm] ne2k-diag for cadre3
- [uCsimm] Need to Change 68EZ328 Boot Rom anyone seen the sour ces?
- [uCsimm] Need to Change 68EZ328 Boot Rom anyone seen the sources?
- [uCsimm] Negative center pin
- [uCsimm] net traffic filtering
- [uCsimm] NetBoot loader
- [uCsimm] network traffic monitor
- [uCsimm] networkadapter for MCF5206eLITE
- [uCsimm] networking stuff
- [uCsimm] New CVS mailing list
- [uCsimm] New ELF tools
- [uCsimm] New linux.bin image gives kernel panic !
- [uCsimm] new subscriber
- [uCsimm] New uCsimm Startup was mail list archives.
- [uCsimm] new version of MAX3111E serial driver
- [uCsimm] Newbie Error in goram and others questions
- [uCsimm] newbie needing help
- [uCsimm] newer uc kernels don't detect eth0 on older ucsimm ?
- [uCsimm] nfs
- [uCsimm] No Limits #1A3F
- [uCsimm] No subject was specified.
- [uCsimm] nope I really am having trouble (uC-src-0.9.2)
- [uCsimm] not hanging anymore
- [uCsimm] Notice #6A27
- [uCsimm] novice needs an elmer, please help the newbie
- [uCsimm] offtopic smt
- [uCsimm] Old uCsimm archive is available again
- [uCsimm] Organization: www.dicit.com
- [uCsimm] OT date
- [uCsimm] OT: Anybody working with the AT91EB40 eval board from Atmel here ?
- [uCsimm] OT: Binutils package
- [uCsimm] Our creation based on uCSimm
- [uCsimm] Palm III again!
- [uCsimm] Patch RTLinux for uclinux, Frank example
- [uCsimm] Patching stock kernel
- [uCsimm] PCMCIA on ucsimm...?
- [uCsimm] Perl for uClinux?
- [uCsimm] Perl for uClinux? -- mini PY
- [uCsimm] phtreads (follow-up) ???
- [uCsimm] phtreads (MMU, and correction to post)
- [uCsimm] phtreads ???
- [uCsimm] Pictures of a uCsimm device
- [uCsimm] ping flood
- [uCsimm] Pinouts for serial cable
- [uCsimm] Pinouts for serial cable & Orientation of Red Tantal um
- [uCsimm] please remove my email from your list
- [uCsimm] Please take me off of this list
- [uCsimm] please: help me solve the uCLinux dilemma
- [uCsimm] Pls. help newbie port uClinux onto M68EZ328ADS and VZ328ADS board
- [uCsimm] Porting ZMODEM on 68EZ328 ...
- [uCsimm] power on reset on the uCsimm
- [uCsimm] Power supply blues
- [uCsimm] Power supply for uCsimm
- [uCsimm] powered serial ports
- [uCsimm] PPP & ip_forward
- [uCsimm] ppp proxyarp on the uCsimm
- [uCsimm] ppp via ucsimm
- [uCsimm] pppd and ppp for uClinux-2.0.38
- [uCsimm] pppd problem
- [uCsimm] Problem related with GORAM Operation
- [uCsimm] Problem running g++
- [uCsimm] Problem setting edge-triggered interrupts
- [uCsimm] Problem to flash unified-2.4.6 image
- [uCsimm] problem when changing baud rate
- [uCsimm] Problem with RedHat 7.0
- [uCsimm] Problem writing to /dev/ttyS0
- [uCsimm] Problems with RTS and CTS in uCsimm
- [uCsimm] Production
- [uCsimm] Programming 68HC11 -wrong group-
- [uCsimm] Programming MC68HC11
- [uCsimm] Progresses on uClinux-2.4.x with uCsimm
- [uCsimm] project
- [uCsimm] proxy arp seems broken to me
- [uCsimm] Prueba
- [uCsimm] Pseudo-Real Time idea
- [uCsimm] pulse detect
- [uCsimm] PWM
- [uCsimm] Python on ucsimm
- [uCsimm] Q: understanding `goram` patch?
- [uCsimm] Query about uCSimm
- [uCsimm] question
- [uCsimm] Question about toolchain
- [uCsimm] question on running ucsimm
- [uCsimm] Question on soldering BGA's (ELAN)
- [uCsimm] Question: Trumpet Software International Products: PetrOS
- [uCsimm] questions about coldfire
- [uCsimm] Quickcam support for uCsimm
- [uCsimm] RE : Motorola S-record Format
- [uCsimm] Read and Write in Bootloader API?
- [uCsimm] realtimelinux.org
- [uCsimm] Rebooting from a NFS kernel image on uCsimm
- [uCsimm] Red Hat 7.1 using uClinux CD install, 2.0.38pre5
- [uCsimm] Reducing memory footprint on uClinux-2.4.x
- [uCsimm] Regulator part on uCgardener
- [uCsimm] Rejected Message
- [uCsimm] Relocation problem
- [uCsimm] Relocation problem - resend, sorry
- [uCsimm] relocation truncated to fit: DISP16 printf
- [uCsimm] remove
- [uCsimm] remove my email from your list
- [uCsimm] remove my name from your list
- [uCsimm] Requirements
- [uCsimm] Requset for Range Scanning method
- [uCsimm] Resent message.
- [uCsimm] RJ45
- [uCsimm] RPM's
- [uCsimm] Rs-232 connection
- [uCsimm] rs-232 pin-out
- [uCsimm] RS-485
- [uCsimm] RS232 and the fellows RTS/CTS, DTR, DCD, RI and DSR
- [uCsimm] RT and uClinux
- [uCsimm] RT Control
- [uCsimm] RT Control aquired by Lineo
- [uCsimm] RT for uClinux
- [uCsimm] RT interrupt example
- [uCsimm] rt-control acquired by Lineo
- [uCsimm] RT-Extension for uClinux version 0.1
- [uCsimm] RT-Fifo problem
- [uCsimm] rtc and processor maintained clock
- [uCsimm] RTC driver
- [uCsimm] RTEC-0.2: improoved interrupt handling
- [uCsimm] RTEC-0.3: added software interrupts
- [uCsimm] RTEC-0.4: added scheduler
- [uCsimm] RTEC-0.4: rom-image
- [uCsimm] RTEC: simple concurrent task system
- [uCsimm] RTL for uClinux bugfix
- [uCsimm] RTL patch for uClinux
- [uCsimm] RTL Port, actually RTAI.
- [uCsimm] RTLinux 0.9j - lost jiffies
- [uCsimm] RTLinux and the uCsimm
- [uCsimm] running uClinux 2.4 on a uCsimm.
- [uCsimm] Ruuning programs from init
- [uCsimm] sage-Number: 19
- [uCsimm] Sample code ...
- [uCsimm] Schematics
- [uCsimm] Schematics of uCsimm
- [uCsimm] Scoket connection to uCsimm
- [uCsimm] send recv questions
- [uCsimm] Senior design project
- [uCsimm] serial data->network
- [uCsimm] serial port / 250KBaud ?
- [uCsimm] Serial port problem
- [uCsimm] serial port use
- [uCsimm] Serial ports
- [uCsimm] serial raw data transfer
- [uCsimm] Serious player
- [uCsimm] Servo Control
- [uCsimm] Setting date/time on uCsimm
- [uCsimm] Setting ramdisk size.
- [uCsimm] Setting up ISP link with uCSimm
- [uCsimm] sharplm64c27p stn lcd un used for sale 500
- [uCsimm] shell ERASE
- [uCsimm] shell scripting oddity
- [uCsimm] SIGNOFF
- [uCsimm] SIMM hardware question
- [uCsimm] SIMM hardware question - solid state relay
- [uCsimm] Simple PWM audio driver
- [uCsimm] simpler memory leak example
- [uCsimm] sleep of serial port
- [uCsimm] SmartMedia
- [uCsimm] smc9194 patches for Lan91C96 ethernet
- [uCsimm] SNMP
- [uCsimm] SNMP agent
- [uCsimm] snmp porting
- [uCsimm] snmpd
- [uCsimm] snmpd from coldfire
- [uCsimm] Software Install Problem
- [uCsimm] Soldering, was: RTL Port, actually RTAI.
- [uCsimm] some application
- [uCsimm] some help
- [uCsimm] some question about VZ328ads
- [uCsimm] somebody can help me ? please
- [uCsimm] sound I/O
- [uCsimm] Source Code
- [uCsimm] Source for the 30 pin SIMM sockets
- [uCsimm] spec of pilot
- [uCsimm] SPI
- [uCsimm] SPI - REALTIME - ETHERNET
- [uCsimm] SPI EEPROM code available
- [uCsimm] SPI port using uC68EZ328 (aka uCsimm)
- [uCsimm] SPI Uart driver...
- [uCsimm] spontaneous reboots
- [uCsimm] spontaneous reboots.
- [uCsimm] Squased Terminal with uClinux-2.4.x on uCsimm
- [uCsimm] src compile problem?
- [uCsimm] Start Address
- [uCsimm] starting ppp
- [uCsimm] strange behavior of MOUNT
- [uCsimm] struct wait_queue using interrupts
- [uCsimm] success story: GDB on uClinux
- [uCsimm] Suggestions please
- [uCsimm] sys_idle syscall
- [uCsimm] System requirements
- [uCsimm] Test
- [uCsimm] test mail please ignore
- [uCsimm] Test Post
- [uCsimm] testing
- [uCsimm] Text based archives ?
- [uCsimm] The infamous "Unable to open initial console" on MC68EZ328 ucsim
- [uCsimm] The MPEG decoder chip - MAS3507D
- [uCsimm] The red 10uF tantalum capacitor
- [uCsimm] the ucSimm CD
- [uCsimm] There yours for FREE!
- [uCsimm] TI & uCsimm
- [uCsimm] Time for Linux!
- [uCsimm] timer availability
- [uCsimm] timing accuracy
- [uCsimm] tinylogin
- [uCsimm] to Tom Walsh
- [uCsimm] To: ucsimm@geekcreek.net
- [uCsimm] touchscreen
- [uCsimm] TRADING
- [uCsimm] Traps 2-15
- [uCsimm] Trouble using minicom
- [uCsimm] tty io
- [uCsimm] TV Platform ideas?
- [uCsimm] UART hardware flow control for 68EZ328
- [uCsimm] UART Hardware flow control.
- [uCsimm] uart to spi?
- [uCsimm] uC-libc compilation problems
- [uCsimm] uC-libc malloc-simple memory leak patch
- [uCsimm] uCbootstrap and FLASH problem on uCsimm with Atmel Flash
- [uCsimm] uCbootstrap and FLASH problems
- [uCsimm] uCbootstrap source code
- [uCsimm] ucd-snmp porting
- [uCsimm] uCdim Status
- [uCsimm] uCdimm (multiple) soon.
- [uCsimm] uCdimm coming soon?
- [uCsimm] uCgames and lissa
- [uCsimm] uCgardener regulator output filtering.
- [uCsimm] ucgardner voltage regulator
- [uCsimm] uCgardner voltage regulator current
- [uCsimm] uClibc, documentation and problems
- [uCsimm] uClibc, documentation and problems„
- [uCsimm] uClibc, documentation andproblems„
- [uCsimm] uClinux - two utilities
- [uCsimm] uClinux 2.2 or 2.4?
- [uCsimm] uClinux 2.4.0.0pre0 released.
- [uCsimm] uClinux ADS
- [uCsimm] uclinux boot problem
- [uCsimm] uclinux boot problem]
- [uCsimm] uClinux cd
- [uCsimm] ucLinux Compact Flash Adapter
- [uCsimm] uClinux compilation problems?
- [uCsimm] uclinux Data/Inst cache handling
- [uCsimm] uClinux directory / new location for 32bit PIC patches
- [uCsimm] uClinux for Motorola 68360
- [uCsimm] uClinux in a Palm IIIx
- [uCsimm] uClinux libc libraries
- [uCsimm] uclinux on L7205?
- [uCsimm] uClinux on M68EZ328ADS board FAQ
- [uCsimm] uClinux on M68EZ328ADS board FAQ (fixed some typos)
- [uCsimm] uClinux on uCsimm example sources
- [uCsimm] uClinux on VZ ADS
- [uCsimm] uclinux paging
- [uCsimm] uCLinux RAM Requirements
- [uCsimm] uClinux source code
- [uCsimm] uClinux-2.0.38.1pre4 hits the wire...
- [uCsimm] uClinux-2.4 for uCsimm ...
- [uCsimm] uClinux-2.4 plus userland for uCsimm up and running using the m68k-elf-toolchain
- [uCsimm] uClinux-2.4.4.0pre0 available from CVS
- [uCsimm] ucLinux-appropriate languages
- [uCsimm] uClinux/CVS repository started
- [uCsimm] uCSimm & LCD Display
- [uCsimm] uCsimm 'goram' command fix.
- [uCsimm] uCsimm - initial root password?
- [uCsimm] uCsimm and RTOS
- [uCsimm] ucsimm as browser
- [uCsimm] uCsimm based projects
- [uCsimm] ucsimm display &keboard problem
- [uCsimm] uCsimm filesystem R/W ?
- [uCsimm] ucsimm firewall
- [uCsimm] uCsimm for production
- [uCsimm] uCsimm for sale
- [uCsimm] ucsimm HW rev 3.2
- [uCsimm] uCsimm i/o pins
- [uCsimm] ucsimm LCD cursor problem
- [uCsimm] uCsimm math.h
- [uCsimm] ucsimm module input &output problem
- [uCsimm] uCsimm NIC diodes
- [uCsimm] uCsimm package order status
- [uCsimm] uCsimm power problem
- [uCsimm] uCsimm pre5 update to pre7 patches don't seem to work?
- [uCsimm] ucSimm robotics
- [uCsimm] uCsimm setup fail
- [uCsimm] uCSIMM software install on RH7.1
- [uCsimm] uCsimm timer
- [uCsimm] ucsimm updates
- [uCsimm] ucsimm with MC68VZ328, LCD source
- [uCsimm] uCsimm With uC/os or RTEMS?
- [uCsimm] uCsimm, MB and CD for sale
- [uCsimm] ucsimm-head.S broken?
- [uCsimm] UDP/IP functions
- [uCsimm] uLinux boot problem
- [uCsimm] Unable to open /proc/uptime
- [uCsimm] unable to open initial console
- [uCsimm] undefined reference to
- [uCsimm] Unofficial FAQ/links page
- [uCsimm] Update: uClinux-2.4.x on uCsimm - flashable image
- [uCsimm] Upload of image.bin fails
- [uCsimm] URGENCY--HELP NEEDED FOR REAL-TIME FIFO
- [uCsimm] USB
- [uCsimm] USB Support?
- [uCsimm] used ucSimm wanted
- [uCsimm] User program sources?
- [uCsimm] using PortC for IO
- [uCsimm] Using the bootloader API
- [uCsimm] Using two or mor uCsimms together??
- [uCsimm] Using uClinux 2.4.x on uCsimm?
- [uCsimm] using uCSIMM Port C for IO
- [uCsimm] Very need help!
- [uCsimm] Vladimir's M68EZ328ADS FAQ at http://uclinux.home.at/
- [uCsimm] Voltage is down
- [uCsimm] Voltage regulator backwards?
- [uCsimm] Voltage Regulator on uCgardener
- [uCsimm] Volunteers always welcome
- [uCsimm] WAP (was GUI code snapshot)
- [uCsimm] Wayward Web Server or is it NFS Cache Crash or is it ???
- [uCsimm] We are back from New York but are very tired from th e long drive
- [uCsimm] We are back from New York but are very tired from the long drive
- [uCsimm] Weatherstation project
- [uCsimm] Web serving and NFS.
- [uCsimm] Weirdness
- [uCsimm] Welcome back
- [uCsimm] What do you think of the uCSimm?
- [uCsimm] What's the problem with the telnet??
- [uCsimm] What's the problems with the serial program??
- [uCsimm] where are you ordering the LM32019 from?
- [uCsimm] Where can I find the latest uCLinux (uCsimm) source
- [uCsimm] where can I get a CCFT inverter for the LM32019T ?
- [uCsimm] Where Flash code located?
- [uCsimm] Where's pin 1 on the ucSimm socket?
- [uCsimm] Whoops, no more bootloader
- [uCsimm] why does "ramvec" go from 0x20000 not 0x0000
- [uCsimm] Why was the 68000 bus not exposed
- [uCsimm] Will trade LCD display for help
- [uCsimm] wireless extentions
- [uCsimm] Wireless phone for embedded devices?
- [uCsimm] Worth a Shot
- [uCsimm] writing ethernet frames
- [uCsimm] writing ethernet frames/overclocking
- [uCsimm] x10 smart home controller
- [uCsimm] xcopilot
- [uCsimm] Yet Another 68VZ328 BOARD
- [uCsimm] Your Satus #2499
- [uCsimm] Your Web Site # 942
- [uCsimm]Question from a newbie. Lan device doesn't work.
- [uCsimm]two question in config development enviroment
- [uscimm] Motorola Dragonball ADS Board LCD
- ADS board
- Announcing C-Kermit 7.0
- Antw: [uCsimm] SmartMedia
- Assembler oddities
- AW: [uCsimm] BOA - browser problem
- AW: [uCsimm] Book
- AW: [uCsimm] Example Code
- AW: [uCsimm] General memory problem
- AW: [uCsimm] Looking for a 16 bit PIO
- AW: [uCsimm] Problem related with GORAM Operation
- AW: [uCsimm] Very need help!
- AW: AW: [uCsimm] General memory problem
- AW: Re [uCsimm] OT: Anybody working with the AT91EB40 eval board from Atmel here ?
- BOUNCEucsimm@uClinux.com: Message too long (>40000 chars)
- Display order
- FS on FLASH
- Hello
- help on microwindows for uClinux on M68EZ/VZ328
- hget ... binary only ?
- I need a patch
- Interested in your work.
- Interview
- Kernel module support
- LCD connectors
- Lineo 68360 board
- m68k-pic-coff-gcc with 32 bit patch.
- novice needs an elmer, please help the newbie
- Panic request - ucsimm external hardware
- Please help! LCD is up at boot promt, but.....
- Pls. help newbie port uClinux onto M68EZ328ADS and VZ328ADS board
- power on reset on the uCsimm
- Power supply blues
- Re [uCsimm] OT: Anybody working with the AT91EB40 eval board from Atmel here ?
- Red Hat 7.1 using uClinux CD install, 2.0.38pre5
- Shell problems solved
- SV: [uCsimm] Problem related with GORAM Operation
- SV: [uCsimm] strange behavior of MOUNT
- SV: [uCsimm] Wireless phone for embedded devices?
- Technical questions about uC68EZ328
- Trouble using minicom
- uCsimm info
- uCsimm port
- ucSimm robotics
- Ynt: [uCsimm] Boardlayout uCSimm
- Ynt: [uCsimm] Connecting to Internet via ucsimm
Last message date: Fri Apr 26 2002 - 04:18:21 EDT
Archived on: Tue May 14 2002 - 09:18:01 EDT
2529 messages sorted by:
[ author ]
[ date ]
[ thread ]
[ attachment ]
About this archive
Other mail archives
This archive was generated by hypermail 2.1.4
: Tue May 14 2002 - 09:18:01 EDT