Re: [uCsimm] Flash problem

From: Lijia (li_jia99@mails.tsinghua.edu.cn)
Date: Thu Jun 28 2001 - 21:17:52 EDT


It seems that your power supply is low.
try 6v for your uCsimm
----- Original Message -----
From: Alain Paschoud <alain.paschoud@smartdata.ch>
To: <ucsimm@uclinux.org>
Sent: Thursday, June 28, 2001 11:49 PM
Subject: [uCsimm] Flash problem

> Hello,
>
> I've a big problem that seems to be very close to the one discussed under
> subject "[uCsimm] uCbootstrap and FLASH problem on uCsimm with Atmel
> Flash".
>
> When I want to flash a new image.bin from bootloader, the image is uploaded, and then the
> uCsimm wirte eras..\ and nothing more appears in minicom.
> If I try to do the same with flashloader through ethernet, the image is
> uploaded, and then the uCsimm restart at once (it doesn't have the time to
> flash it). So I start on the old system. Nothing has been erased, nothing
> has been flashed.
>
> I have an ATMEL flash A49BV1614. But the bootloader version is "uCbootstrap
> v1.5.7". So I won't apply the new bootloader version 1.05.01 proposed on
> the web site.
>
> Does someone have (or have had) the same problem ? What can I do ?
>
> Thank you for any help.
> ---------------------------
> Alain Paschoud
>
> SMARTDATA SA
> http://www.smartdata.ch
> Phone : +41 (0)21 693 84 98
> Fax : +41 (0)21 693 84 91
>
>
>
> This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/
>
This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:43 EST