Thanks Evan & Uwe,
I've now got to the bottom of my problem...believe it or not it was faulty
connection on my LEDs!!
It's always the simple things that get me :-)
The original program does in fact work!
the "PCSEL |=0x01; and PCDIR |=0x01;"
lines in the code set up the operation mode of the port as defined in the
I've been delving through the m68ez328 manual, so I've learnt a bit.
Once again - many thanks for your time.
This message resent by the email@example.com list server http://www.uClinux.com/
This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:43 EST