> Asier Goikoetxea Yanci wrote:
> Hi all,
> I've an obvious question to do, just to be sure that there isn't
> way to undo the error that I've commited. I've used SHARP LM32019P
> LCD. I connected it to uCsimm, but in the wrong order, I mean, I
> connect LCD's pin 1 to VEE, pin 2 to GND, 3 to VDD ... now, my
> question is if this damages the LCD. I think that the only pin
> affected is the first, because the others works with 5 volts, and I
> appli them this voltage.
> Now I connect the LCD correctly but don't apear anything in. In
> case that I damages the LCD, can anybody tell me where can I find this
> LCD? (I'm in Spain) I asked to several providers and said me that I've
> to wait for 25 WEEKS to get it.
Look VERY carefully at the FP Cable coming from the LCD, you will see
that one side of the cable has a plastic covering over the "pins", the
other side of the cable has a "shorter" covering over the cable.
-- Tom Walsh - WN3L - Embedded Systems Consultant 'www.openhardware.net', 'www.cyberiansoftware.com' "Windows? No thanks, I have work to do..." This message resent by the email@example.com list server http://www.uClinux.com/
This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:42 EST