Re: [uCsimm] Where's pin 1 on the ucSimm socket?

From: Phil Wilshire (philw@lineo.com)
Date: Wed Feb 28 2001 - 03:39:00 EST


Chris,
here's an ascii art sketch for you

      ucsimm
      guide + nw leds
      this side
      
| prototype area |
| |
| |> <| clips to secure simm
| |] [| posts to guide simm
| +++++++++++++++++++++++++++++++++++++ |
| |
| Ethernet serial power |
| |
+++++++++++++++++++++++++++++++++++++++++++++
;-))
 Phil Wilshire

 Worley wrote:
>
> I've lost the directions on assembling the Gardner unit, and it's not
> available at the uclinux/rt-control/lineo web site (actually, nothing
> concerning hardware is available: if you look under customer support for
> the ucSimm, all you get is hardware sales blurbs and ucLinux support).
>
> Neither it's simm socket nor the ucSimm are marked as to where pin 1 is.
>
> I've searched the archives thoroughly.
>
> I don't have the Gardner with me (the lady doing some rework does, and
> she assures me it's not marked). I have the ucSimm; it's not marked.
>
> I'm guessing the 1 pin on the socket is on the keyed end.
>
> Can anyone enlighten me?
>
> Thanks,
>
> Chris
> This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/
This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:42 EST