Re: [uCsimm] The red 10uF tantalum capacitor

From: Jonathan J. (davis@snickers.org)
Date: Tue Feb 27 2001 - 10:38:35 EST


 ok, thanks, that clears everything up, in that case the image was wrong,
and it needs to be turned around.

thanks again,

-- 
:.. ..   : ...... : . .. . :      . :
   jonathan j. davis@snickers.org /~davis/index.html

On Tue, 27 Feb 2001, daniel haensse wrote:

> the pin without a "+" must be connected to the top layer of the board (gnd > layer) which will route to pin 9 of the simm socket. > Dani > > > I don't know if this is appropriate for this list, but before I solder > > the uCgardener board together, I have a question about the above > > component, as warned "The red 10uF tantalum capacitor mst be oriented with > > the anode (marked with a + and a vertical stripe) facing the center of the > > PCB and the unmarked side closest to the Rj45 connector" > > > > I am a bit confused reguarding this, as I when I face the side of the > > capacitor with the strip towards the PCB, the unmarked side does not face > > the RJ45 connector, the link is to a gif which I think shows the WRONG way > > to orient the capacitor, > > > > http://www.snickers.org/~davis/10ufTantalumC.gif > > > > This way, the capacitor faces the PCB, and the unmaked back of it faces > > the DB9 serical connector, but then, the side with the stripe is closest > > to the RJ45. Help? > > > > thanks, > > -- > > :.. .. : ...... : . .. . : . : > > jonathan j. davis@snickers.org /~davis/index.html > > > > This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/ >

This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:42 EST