Re: [uCsimm] minicom and suse 7.0 - SUCCESS !!

From: Achim Schlumpberger (aschlum@tech4today.com)
Date: Fri Feb 16 2001 - 07:30:30 EST


thanks to daniel haensse - I forgot to check ttyS1 instead of ttyS0
And it works with ttyS1 (but still not with ttyS0 although they do have the same
settings (checked with stty))

again, thanks to everybody

achim

Achim Schlumpberger wrote:

> I tried every hint I got - but I still get the xmodem error: "NAK on sector" :-(
> Hyperterminal running under W2K does the job, so I'm able to go ahead - but it would
> still be easier to transmit the images without having Windows 2000 in the chain
>
> Here is what I did
> - I changed the cables and tried two other ones
> - I retried the send several times without stopping minicom
> - I retried the send several times with stopping minicom
> - I used root
> - I used another user
> - I used 9600 baud
> - I used 115200 baud
> - I had linefeed on and off
> - I had local echo on and off
> - I made a shellscript "sx" with a debug info in it and a call to "/usr/bin/sz -X
> -vv" in it and I'm sure that the xmodem protocol is used
> - I tried "/usr/bin/sz -X Y U N Y N" as the xmodem option in the protocol setting
> menue (ALT-O)
> - I tried all the other combinations in the options menue
> - I started the download as fast as I could
> - I started the download after some seconds
> - I used kermit and got the same error
>
> At that point I thought that hyperterminal and W2K is OK for me
>
> Thanks to everybody
>
> Achim
>
> Erdem Gunes wrote:
>
> > After writing "rx", you must select the file and start the transfer in about
> > 10 seconds, otherwise protocol timeout may occur.
> > Try also making it without changing speed.
> >
> > ----- Original Message -----
> > From: "Achim Schlumpberger" <aschlum@tech4today.com>
> > To: <ucsimm@uClinux.com>
> > Sent: Wednesday, February 14, 2001 1:49 PM
> > Subject: [uCsimm] minicom and suse 7.0
> >
> > > I'm trying to upload my first image file to the ucsimm...
> > >
> > > I successfully connected via ttyS0 and changed the speed to 115200
> > > (minicom and bootloader)
> > > Then I typed the rx command.
> > > Then I started the xmodem upload (after changing the protocol entries to
> > > use /usr/bin/sz -X) and then I always get the xmodem error "NAK on
> > > sector".
> > >
> > > Any help ?
> > >
> > > Achim Schlumpberger
> > >
> > > Tech4Today GmbH
> > > aschlum@Tech4Today.com
> > >
> > >
> > > This message resent by the ucsimm@uclinux.com list server
> > http://www.uClinux.com/
> > >
> >
> > This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/
>
> --
> Achim Schlumpberger
>
> Tech4Today GmbH
> Heusteigstraße 37
> 70180 Stuttgart
>
> Fon: +49 (0)711 620 8809
> Fax: +49 (0)711 620 8811
>
> This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/

--
Achim Schlumpberger

Tech4Today GmbH Heusteigstraße 37 70180 Stuttgart

Fon: +49 (0)711 620 8809 Fax: +49 (0)711 620 8811

This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:41 EST