After writing "rx", you must select the file and start the transfer in about
10 seconds, otherwise protocol timeout may occur.
Try also making it without changing speed.
----- Original Message -----
From: "Achim Schlumpberger" <firstname.lastname@example.org>
Sent: Wednesday, February 14, 2001 1:49 PM
Subject: [uCsimm] minicom and suse 7.0
> I'm trying to upload my first image file to the ucsimm...
> I successfully connected via ttyS0 and changed the speed to 115200
> (minicom and bootloader)
> Then I typed the rx command.
> Then I started the xmodem upload (after changing the protocol entries to
> use /usr/bin/sz -X) and then I always get the xmodem error "NAK on
> Any help ?
> Achim Schlumpberger
> Tech4Today GmbH
> This message resent by the email@example.com list server
This message resent by the firstname.lastname@example.org list server http://www.uClinux.com/
This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:41 EST