On Wed, 14 Feb 2001, you wrote:
> I'm trying to upload my first image file to the ucsimm...
> I successfully connected via ttyS0 and changed the speed to 115200
> (minicom and bootloader)
> Then I typed the rx command.
> Then I started the xmodem upload (after changing the protocol entries to
> use /usr/bin/sz -X) and then I always get the xmodem error "NAK on
> Any help ?
"man sz" shows:
sb, sz - XMODEM, YMODEM, ZMODEM file send
We removed the link sx -> sz in /usr/bin, because there is
another sx part of the nsgmls parser tools. So if you
don't use nsgmls parser tools but like to have the origi
nal sx command from the rzsz package, create the link
> Achim Schlumpberger
> Tech4Today GmbH
> This message resent by the firstname.lastname@example.org list server http://www.uClinux.com/
-- Juan José "Peco" San Martín
Microbótica, S.L Mail: email@example.com Web: www.microbotica.es This message resent by the firstname.lastname@example.org list server http://www.uClinux.com/
This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:40 EST