On this same topic, how would you automatically disable the
ethernet if it isn't connected, so it is easy to use the ucSimm
with or without a network?
Claudio Duffini wrote:
> R J McIntyre wrote:
>> Hello everyone,
>> of course, tried this and connected it
>> up to my 3Com 3C509B network card but still no joy.
> Hi Rory
> Did you connected the uCsimm to your PC network card ? For
> this connection, you *must* use a crossed cable, not a
> straight one. If you want to use straight network cables
> you should instead put an hub between your PC and your
This message resent by the firstname.lastname@example.org list server http://www.uClinux.com/
This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:40 EST