Re: [uCsimm] ARM port

From: D. Jeff Dionne (jeff@lineo.ca)
Date: Sun Dec 17 2000 - 12:07:17 EST


On Sat, 16 Dec 2000, Erwin Authried wrote:

> There seem to be some problems with the current ARM port from
> cvs.uclinux.org. At startup, the EBI control registers are initialized with
...
> Lineo version...
...
> offical kernel source for *all* architectures, otherwise the development

The uClinux.org site is the "official" version, since I am the
maintainer. It (just) happens to be Lineo sponsored. Please send me
patches relative to it, since that's the one that will be used going
forward. It is also the basis for the pending uClinux 2.4 release (on the
BSP side).

> will drift apart even more, making it more difficult to merge all the
> versions together.

Yes, I agree. But I do move people's cheese. In this case, the ARM tree
underwent a substantial reorg, and I'm actually not done with that
yet. It's going to end up looking like the m68knommu arch in all the
other architectures as well (arch/$ARCH/platform/$PLATFORM/$BOARD
directory tree). Unfortunately, the drivers will need to be moved over by
the various port maintainers.

Jeff.

>
> -Erwin
>
> ----- Original Message -----
> From: D. Jeff Dionne <jeff@lineo.ca>
> To: <ucsimm@uClinux.com>
> Sent: Saturday, December 16, 2000 5:43 AM
> Subject: Re: [uCsimm] ARM port
>
>
> > On Fri, 15 Dec 2000, Slepov Dmitry wrote:
> >
> > > I cannot access http://uclinux.home.at/ (host not
> > > found)
> > > Is this site down or something?
> >
> > ARM on Atmel AT91 series device support is in the mainline 2.0 uClinux
> > tree CVS. http://cvs.uclinux.org
> >
> > It is maintained by Erik Andersen.
> >
> > It will also be supported early in the uClinux 2.4 development cycle, but
> > m68k is where 2.4 development is occuring right now because it is easier.
> >
> > Jeff.
> >
> > >
> > > Thanks,
> > > Dmitry
> > >
> > > --- Erwin Authried <eauth@softsys.co.at> wrote:
> > > > Slepov Dmitry[SMTP:dmitryslepov@yahoo.com] wrote:
> > > > > Hello there!
> > > > > I am wondering if anybody is actually working with
> > > > an
> > > > > ARM port of uClinux?
> > > > >
> > > > > Dmitry
> > > > >
> > > >
> > > > Hello Dimitry!
> > > >
> > > > You can find information about ARM ports in the
> > > > uClinux Directory at
> > > >
> > > > http://uclinux.home.at/ , in the folder
> > > > Architectures -> ARM7
> > > >
> > > > -Erwin
> > > >
> > >
> > > > ATTACHMENT part 2 application/ms-tnef
> > >
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Shopping - Thousands of Stores. Millions of Products.
> > > http://shopping.yahoo.com/
> > > This message resent by the ucsimm@uclinux.com list server
> http://www.uClinux.com/
> > >
> >
> > This message resent by the ucsimm@uclinux.com list server
> http://www.uClinux.com/
> >
> >
>
> This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/
>

This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:39 EST