RE: [uCsimm] Wireless phone for embedded devices?

From: Paul Jones (paulj@nortelnetworks.com)
Date: Wed Dec 13 2000 - 17:06:26 EST


I think that NOKIA does one, or they did have one but the cost is high.

I know that the erricson 1018A can be controlled externaly, but I'm not sure
about the modem side of it.

regards
Paul B Jones 8)
-----Original Message-----
From: Brett Hackleman [mailto:brhackle@eos.ncsu.edu]
Sent: Thursday, 14 December 2000 6:53
To: ucsimm@uClinux.com
Subject: [uCsimm] Wireless phone for embedded devices?

Sorry if this is a bit off topic --

Can anyone recommend a GSM phone that comes in a card form-factor (ie:
serial interface only, no display, no keypad, with audio in/out jacks,
external antenna).

I'm working on a demo that would benefit from having an integrated
wireless modem (voice & data) and remote antenna, which is why I'm not
using a standard phone & data cable.

The modem will be used in the US, so it needs to be GSM 1900 or another
standard that will have nationwide coverage.

I've looked at Wavecom, but most of their products won't be FCC approved
until end of 1Q 2001. Siemens has some great stuff but it's all GSM
900.

Thanks in advance for any links you can provide,

Brett

=============
brhackle@eos.ncsu.edu
This message resent by the ucsimm@uclinux.com list server
http://www.uClinux.com/

This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:39 EST