Re: [uCsimm] ucsimm HW rev 3.2

From: Phil Wilshire (philw@zentropix.com)
Date: Thu Oct 12 2000 - 07:57:00 EDT


Claudio

Try a make config.
You may need to reverse the byte order for the CS8900

See this snippet...

Cirrus Logic cs8900 ethernet (CONFIG_UCCS8900) [Y/n/?]
Hardware byte-swapping support for cs8900 ethernet
(CONFIG_UCCS8900_HW_SWAP) [Y/n/?]

Regards
  Phil Wilshire

> Hi all. I am using toolchain 2.0.38 on RH 5.2 machine for development.
> All went OK until now. Recently I received five simms (hardware revision
> 3.2 with uclinux 2.0.38.1), and using the flashloader of
> the 2.0.38.0 toolchain on these units produces an error when the
> kernel tries to initialize the CS8900. It fails with these messages :
>
> SIOCSIFADDDR=-1: 19
> SIOCGIFFLAGS = -1: No such device (19)
> SIOCADDRT=-1: 19
> SIOCADDRT=-1: 19
>
> Is something changed ? And if yes, what ?
>
> Regards
This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:38 EST