At 12:20 PM 10/10/2000 Tuesday, you wrote:
>John Jeffers wrote:
> > Hello
> > I need to change the download rate from 115K which NEVER works to something
> > lower (9600 baud always works).
>The 115K rate works well, for me. can you tell us what are you using
>to transfer files at that speed ? (hw/sw....). Using windows 2000 or NT4
>with hypercomm works well....and note that this is ALL microsoft
>strange, huh ? ;)
I'm using Minicom and it works well at 9600 and does Xmodem at 9600 baud at
115k the ROM bios can be talked to but does not transfer with Xmodem.
I have tried
:Toshiba 510CDT, ABIT BE6 II, Armada 7800 and a clone board all of
which have interrupts enabled in BIOS.
Currently I have tried three fully loaded Cables.
I guess what I have to do is only download the image file at 9600 baud
which takes a long long time.
>the bootloader isn't free, at least for the ucsimm. But why change the
>speed if 9600 works ? The bootloader starts just at 9600...
This message resent by the firstname.lastname@example.org list server http://www.uClinux.com/
This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:38 EST