Re: [uCsimm] ethernet connectivity problem

From: David Smead (smead@amplepower.com)
Date: Mon Jul 17 2000 - 16:27:12 EDT


Richard,

If you're trying to ping using IP numbers and getting no joy, then that
would indicate a hardware problem. If you're using host names, then you
get to learn more about name resolution.

Sincerely,

David Smead
http://www.amplepower.com.
http://www.ampletech.com.

On 17 Jul 2000, Richard Sevenich wrote:

> Another newbie question for my new uCsimm setup.
>
> I have serial communication established between my laptop and the uCsimm
> which is on the uCgardener. I now want to establish the ethernet connection.
> Both the uCsimm and laptop recognize their respective ethernets, each has a
> different IP address on the same subnet etc., each can ping itself by the
> proper IP - but neither can ping the other. I believe I have the respective
> machines set up properly, but perhaps there
> is something I've missed. Any hints?
>
> The laptop's ethernet pcmcia card is new, so it could have a RJ45 connector
> problem I suppose. The two machines are connected by a crossover cable, but I
> also tried with regular cables and my hub.
>
> I would appreciate hints/advice.
>
> TIA,
> Sev
>
>
> ____________________________________________________________________
> Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.
> This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/
>

This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:37 EST