Re: [uCsimm] Re: LCD connectors

From: Miles Lott (milos@insync.net)
Date: Wed Jul 12 2000 - 08:59:29 EDT


Sorry to bring this up again, but does anyone have any pointers on correctly
connecting
this device?

Miles Lott wrote:

> I have 4 of the touch panel connectors that I can sell/trade. For the
> inverter, I actually bypassed it and soldered to the board. Not so
> elegant, I suppose.
>
> I am having trouble getting the Sharp LCD to work, though. Here is an
> outline of how I decided I needed to connect it. Anyone scanning this
> list should definitely NOT use this as a guideline. I am pretty sure I
> got something if not most of it wrong:
>
> LCD uCsimm power
> --------------------------------------
> 1 S 26 LFLM
> 2 CP1 25 LLP
> 3 CP2 24 LCLK
> 4
> 5
> 6 D0 30 LD0
> 7 D1 29 LD1
> 8 D2 28 LD2
> 9 D3 27 LD3
> 10 VDD 5V
> 11 VSS GND
> 12 VEE 16-22V
>
> On Fri, 7 Jul 2000, Tom Walsh wrote:
>
> > Steve Butts wrote:
> > >
> > > Tom Walsh wrote:
> > > > It looks like the BERG p/n 67516-204 is what we need to connect the
> > > > Touch Plate FPC cable to a header mounted on the controller PCB. Now
> > > > the problem is to find someone who has the darned thing, I cannot find a
> > > > listing on Newark, DigiKey, or Mouser for this part, frustrating.
> > >
> > > Finally got the LCDs, inverter, and touch panel but I can't find the
> > > connectors anywhere.
> > > I know someone found a place to order the touch panel connector, but
> > > what about for the Sharp LCD and inverter? From the specs, these have
> > > been the connectors I've been looking for, LCD: 5597-12APB or 5597-12CPB
> > > or 52044-1245 Inverter: 53261-0510
> > >
> > > If anyone has found a place to order these, or have gotten other
> > > connectors to work please let me know. Thanks.
> > >
> >
> > For the inverter supply (+12v) contact the people at flat-panel.com,
> > they should have also sent the connector & pig-tail leads with each
> > inverter. They did the same thing to me and after I contacted them,
> > they sent the missing parts.
> >
> > For the LCD, someone else on this list said that they purchased a
> > connector for the Sharp LCD from the flat-panel.com people for an
> > additional $3.
> >
> > TomW
> >
> >
> >
>
> --
> Miles Lott <milos@insync.net>
> http://milosch.net
> http://www.netmio.com
>
> This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/

This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:37 EST