Re: [uCsimm] IDE interface?

From: Sebastian Andersson (bofh@diegeekdie.com)
Date: Thu Jul 06 2000 - 07:15:48 EDT


On Thu, Jul 06, 2000 at 12:46:00PM +0200, Håvard Tørring wrote:
> At 10:08 06.07.00 +0200, you wrote:
> >The ATA specification says the devices can be configured to do 8 bit
> >transfers by sending a command to the drive.
>
> Could you please tell me how. -I can't find anything in my ATA spek.

Use the Set Features (0xEF) command.
Feature should be set to "Enable 8 bit data transfer" (0x01).

/Sebastian
This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:37 EST