AW: [uCsimm] Problem related with GORAM Operation

From: Epping, Jörg (j.epping@benning.de)
Date: Tue Jul 04 2000 - 03:58:23 EDT


Hi Bo-hee Lee,

after the downloading with 115200 bps I reset the module and change minicom
to 9600 baud. Then I type 'go' on the console.

Regards

Joerg

> -----Ursprüngliche Nachricht-----
> Von: bhlee@venus.semyung.ac.kr [SMTP:bhlee@venus.semyung.ac.kr]
> Gesendet am: Sonntag, 3. September 2000 09:13
> An: ucsimm@geekcreek.net
> Betreff: [uCsimm] Problem related with GORAM Operation
>
> Dear Everyone,
>
> This is first visit.
> I'm using uCsimm module. I have some problems to download the new ram OS
> image.
> To test my new program, I did the below action
>
> 1. make image.bin(generate new image)
> 2. minicom ttyS0
> 3. fast ( change the baudrate to 115200bps)
> 4. rx(start xmodem protocol)
> 5. After downloading successfully, type goram
> 6. just display "GO", and halt(no response)
>
> I'd like to know why the booting scenario didn't go. Of course the "Go(rom
> booting)" command works well.
> when I select the 9600bps, the booting scenario works well, but the
> downloading time is too long.
>
> Please let me know the solution. Thanks in advance.
>
> Regards,
> Bo-hee Lee
>
>
>
> This message resent by the ucsimm@uclinux.com list server
> http://www.uClinux.com/
This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:37 EST