[uCsimm] uCsimm setup fail

From: san (sansfa@hanmail.net)
Date: Tue May 30 2000 - 07:59:45 EDT


1.install SuSe5.3

2.install all uClinux package on libc5
  #/cdrom/Rpms/libc5/make

3.setting serial & minicom
  #chmod oug+rw /dev/ttyS0
  #ln -sf /usr/bin/rz /usr/bin/rx
  #ln -sf /usr/bin/sz /usr/bin/sx
  #minicom -s(9600,8N1,NOR,VT102)

4.NFS setting
  #vi /etc/exports
       => insert line "/home (ro)"
  #vi /opt/uClinux/romdisk/etc/rc
       => ip address & gateway modify
  #vi /opt/uClinux/romdisk/etc/resolve.conf
       => domain ip modify
  #vi /opt/uClinux/romdisk/etc/passwd
       => insert line "work::501:501:work:/home/work:/bin/bash"

5.build a working env
  #mkdir /testing ;cd testing ;buildenv ;make

6.connect ucsimm
  ----rs232c--+ +---rj45
  --power-----------------
             BOARD
         -----------------

7.minicom -o

8.But, ... black screen on there ... ToT ...

9.connecting rj45, hub's led don't turn on,
  may be h/w problem?

0.thank you!
==================================================
No. 1 우리 인터넷, Daum
평생 쓰는 무료 E-mail 주소 한메일넷
지구촌 한글 검색서비스 Daum FIREBALL
http://www.daum.net
This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:36 EST