On Tue, 16 May 2000, Terry Carlin wrote:
> Looking at the drawings, I see there are two diodes that can be hooked
> added to the uCsimm. The drawing shows there is a 1k resister in
> series with the diode. Is this resister on the simm or do I need to
> add a 1k resister when I add a diode?
for the Ethernet link/transfer lights?
just poke two diodes (oriented correctly) in the four holes on the uCsimm
and solder 'em in! no need to add a resistor...
> Terry Carlin
> This message resent by the firstname.lastname@example.org list server http://www.uClinux.com/
This message resent by the email@example.com list server http://www.uClinux.com/
This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:36 EST