Re: [uCsimm] Power supply for uCsimm

From: Stuart Hughes (sehughes@zentropix.com)
Date: Mon May 08 2000 - 04:17:56 EDT


erik@calderasystems.com wrote:
>
> Before I plug this thing in, I want to know beyond the shadow of a doubt that
> pumping 4.5v into this is okay. This may seem obvious to seasoned embedded
> hackers, but some of us are just now starting. When I see one set of docs say
> this runs at 3.3v and the board says 4-6v, and there is no further explanation
> offered in documentation, the main web site, FAQs, etc., I get worried (why
> isn't that clearly documented? I can't be the only person who's ever wondered
> about this).

Hi Erik,

As you will have seen by now from the other answers, this will work
fine. I have a uCsimm and I use a 500ma supply, I have tried it at 4.5
and 6 volts, both work.

Regards, Stuart Hughes
Zentropix - a Lineo Company
This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:36 EST