RE: [uCsimm] RJ45

From: Stu (doktor1@earthlink.net)
Date: Mon Apr 10 2000 - 14:09:13 EDT


> Hi!
> I am testing the ucsimm and I have a problem. Any body could help me?
>
> TCP compression code copyright 1989 Regents of the University of
> California
> IPPP line discipline registered.
> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
> CSLIP: code copyright 1989 Regents of the University of California.
> cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>
> cs89x0.c:68EZ328 support D. Jeff Dionne <jeff@rt-control.com> 1999
> eth0: cs8900 rev H found at 0x10000300 3.3Volts media RJ-45, 00 50 c2 03
> 62 1b
> VFS: Mounted root (romfs filesystem) readonly.
> eth0: Setting MAC address to 00 50 c2 03 62 1b. eth0: Attempting TP
> eth0: 10Base-T (RJ-45) has no cable
> eth0:no network cable attached to configured media
> SIOCSIFFLAGS = -1: Try again (11)
> eth0: transmit timed out, IRQ conflict?
> cs8900 did not allocate memory for tx!
> eth0: transmit timed out, IRQ conflict?
> eth0: transmit timed out, IRQ conflict?
>
> Well, I think that the cable is correct (it's the same cable of my
> computer).
> What happen, any idea???

You can't use a straight-through ethernet cable to connect the uCsimm to a
computer. Either use a hub, or get a crossover cable.

This message resent by the ucsimm@uclinux.com list server http://www.uClinux.com/



This archive was generated by hypermail 2b30 : Sun Apr 07 2002 - 00:01:35 EST