uClinux/COLDFIRE(m5307)
COLDFIRE port done by Greg Ungerer, gerg@lineo.com
Modified for M5307 by Dave Miller, dmiller@intellistor.com
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
Calibrating delay loop.. ok - 59.80 BogoMIPS
Memory available: 14236k/16384k RAM, 0k/0k ROM (470k kernel code, 179k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
uClinux version 2.0.38.1pre7 (root@simon) (gcc version 2.95.2 19991024 (release)) 22 Tue Feb 20 11:46:00 CST 2001
ColdFire internal UART serial driver version 1.00
ttyS0 at 0x100001c0 (irq = 73) is a builtin ColdFire UART
ttyS1 at 0x10000200 (irq = 74) is a builtin ColdFire UART
ledman: Copyright (C) Lineo, 2000.
Ramdisk driver initialized : 16 ramdisks of 4096K size
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 8 disk images:
0: A2BAC-1E0BAB (RO)
1: F0000000-F0003FFF (RW)
2: F0004000-F0005FFF (RW)
3: F0006000-F0007FFF (RW)
4: F0010000-F00EFFFF (RW)
5: F00F0000-F00FFFFF (RW)
6: F0000000-F00FFFFF (RW)
7: F0008000-F000FFFF (RW)
IDE: waiting for drives to settle...
IDE: waiting for drives to settle...
IDE: waiting for drives to settle...
IDE: waiting for drives to settle...
PPP: version 2.3.8 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu)
SMC9194: SMC91C94(r:9) at 0x30600300 IRQ:27 INTF:TP MEM:6144b ADDR: 65:66:65:66:65:66 
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname eLIA
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: /bin/expand /etc/ramfs.img /dev/ram1
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
EXT2-fs: 01:00: couldn't mount because of unsupported optional features.
mount: wrong fs type, bad option, bad superblock on /dev/ram0,
       or too many mounted file systems
Command: mount -t ext2 /dev/ram1 /etc/config
EXT2-fs: 01:01: couldn't mount because of unsupported optional features.
mount: wrong fs type, bad option, bad superblock on /dev/ram1,
       or too many mounted file systems
Command: mkdir /var/tmp
/var/tmp: Read-only file system 
Command: mkdir /var/log
/var/log: Read-only file system 
Command: /bin/flatfsd -r
FLATFSD: failed to read flatfs, err=-10 errno=30
Execution Finished, Exiting
Shell invoked to run file: /etc/config/start
Command: #
Command: # generic get ip-address with dhcp startup
Command: #
Command: ifconfig lo 127.0.0.1
Command: route add -net 127.0.0.0 lo
Command: route add -host 255.255.255.255 dev eth0
Command: dhcpcd -p -a eth0 &
[18]
Execution Finished, Exiting
Shell invoked to run file: /etc/config/ipfwrules
/etc/config/ipfwrules: Invalid argument 
init: cannot open inittab

Sash command shell (version 1.1.1)
/>