RE: [uClinux-dev] Adding new board support in latest snapshot

From: Adam Kropelin (Adam.Kropelin@netlinkaccess.com)
Date: Wed Nov 14 2001 - 10:13:55 EST

Next message: MQuicquaro@necinfrontia.com: "Re: [uClinux-dev] BDM help."
Previous message: Tom Walsh: "Re: [uClinux-dev] Adding new board support in latest snapshot"
Maybe in reply to: Adam Kropelin: "[uClinux-dev] Adding new board support in latest snapshot"
Next in thread: Erwin Authried: "Re: [uClinux-dev] Adding new board support in latest snapshot"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

> -----Original Message-----
> From: David McCullough [mailto:davidm@snapgear.com] 
> Sent: Tuesday, November 13, 2001 7:53 PM
> To: uclinux-dev@uclinux.org
> Subject: Re: [uClinux-dev] Adding new board support in latest snapshot
> 
> > cp: vendors/Netlink/ExpressLink/config.linux: No such file or 
> > directory
> 
> The above error from below says you do not have a default 
> config.linux in the vendors/VendorName/Product dir either.  
> As gerg suggested,  copy one from somewhere else and then 
> customise it.  Although if you don't mind starting from 
> scratch then it should still work fine ;-)

Yup, that was it. I thought I could get away without a config.linux file to
start with, but the make config at the kernel level needs a .config to start
from, so...

Thanks for the pointer.

--Adam
This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/

Next message: MQuicquaro@necinfrontia.com: "Re: [uClinux-dev] BDM help."
Previous message: Tom Walsh: "Re: [uClinux-dev] Adding new board support in latest snapshot"
Maybe in reply to: Adam Kropelin: "[uClinux-dev] Adding new board support in latest snapshot"
Next in thread: Erwin Authried: "Re: [uClinux-dev] Adding new board support in latest snapshot"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Sep 19 2002 - 13:20:25 EDT