From: Vadim Lebedev (vlebedev@aplio.fr)
Date: Wed Jan 31 2001 - 05:04:34 EST
Jifry
Try to use make menucocnfig and disable MTD support....
Vadim
|-----Original Message-----
|From: owner-uclinux-dev@uClinux.org
|[mailto:owner-uclinux-dev@uClinux.org]On Behalf Of s Mohamed Jifry
|Sent: mercredi 31 janvier 2001 09:07
|To: uclinux-dev@uClinux.org
|Subject: [uClinux-dev] Porting uClinux to EB63 board
|
|
|Hi all
|I am Jifry from Sri Lanka.
|I am interest in Embedded system development in linux platform. Now my
|interest is to port uclinux to some ARM7TDMI development board. In this
|regard I bought EB63 board from Atmel. Just for the beginning I did the
|following to make it to work for the EB01 board.
|1. I have downloaded uclinux-2.0.38.1pre3 kernel tree , apilio.trio SDK
|(cross compiler. dbk etc) and and the patch file for EB01 from
|(http://uclinux.home.at, Architectures -> ARM7 -> Atmel EB01)
|2. I applied the patch file to the kernel tree and it worked fine
|3. I changed the cross compiler name and run the command "make
|mrproper". It worked fine
|4. I applied "make config".
|5. Once I apply the "make dep" it say some error. last line of the error
|massages are given bellow
|make: *** mtd: No such file or directory. Stop.
|make[1]: *** {fastdep] Error 2
|make: *** [dep-files] Error 2
|
|Any suggestions to make it work for EB01 board ?
|
|And I know that there are few differences between EB01 and EB63 mainly
|Multi-Processor Interface and a Serial Peripheral Interface. But
|currently I am not interested in those features.
|
|Any suggestions to make it work for EB63 board without these features?
|Does anyone already working with this?
|
|Thanks in advance
|
|Best Regards
|
|Jifry.
|
|This message resent by the uclinux-dev@uclinux.org list server
http://www.uClinux.org/
This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/
This archive was generated by hypermail 2.1.4 : Thu Sep 19 2002 - 13:19:28 EDT