[uClinux-dev] Strange M5249C3 problem ..

From: Lars Segerlund (lars.segerlund@comsys.se)
Date: Fri Sep 20 2002 - 10:46:49 EDT

Next message: Bernhard Kuhn: "[uClinux-dev] Installation instructions for gdb & gdbserver on ARM7TDMI"
Previous message: David McCullough: "Re: [uClinux-dev] problem building arm-elf toolchain"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

  I disabled the support for the ethernet interface, but it still gives me :

ColdFire internal UART serial driver version 1.00
ttyS0 at 0x100001c0 (irq = 73) is a builtin ColdFire UART
ttyS1 at 0x10000200 (irq = 74) is a builtin ColdFire UART
M5249AUDIO: (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
M5249AUDIO: DMA channel=0, irq=120
kmem_create: Forcing size word alignment - blkdev_requests
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: B4E78-6CB277 [VIRTUAL B4E78-6CB277] (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK: romfs filesystem found at block 0
RAMDISK: Loading 1062 blocks [1 disk] into ram disk... done.
VFS: Mounted root (romfs filesystem) readonly.

  and silently halts ...

  any ideas ?

  / Lars Segerlund.

This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/

Next message: Bernhard Kuhn: "[uClinux-dev] Installation instructions for gdb & gdbserver on ARM7TDMI"
Previous message: David McCullough: "Re: [uClinux-dev] problem building arm-elf toolchain"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 20 2002 - 12:01:56 EDT