From: Bernhard Kuhn (bkuhn@lineo.com)
Date: Mon Sep 16 2002 - 12:40:11 EDT
"Y.H. Park" schrieb: > Sorry, i missed to enable the FPE option in the kernel configuration. > The error is occurred from setjmp() function which , in my guess, use some floating point instructions. I "solved" this particular problem by disabling fp support in uClibc :-) If you are interessted, then we can work together on getting gdbserver working on ARM7TDMI. At the moment, i got somewhat stuck at single stepping: the ARM7TDMI doesn't provide hardware single stepping and i didn't yet figured out how to configure gdb to do software assisted single stepping (which seems to be supported by gdb) I will create a patch for what i have so far (reading/modfiying variables, setting breakpoints etc.) best regards Bernhard -- Bernhard Kuhn, Senior Software Engineer, Lineo Inc. (Where Open Meets Smart) This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/
This archive was generated by hypermail 2.1.4 : Thu Sep 19 2002 - 13:21:52 EDT