[uClinux-dev] cs89x0 issue

From: Aavan (lvjianguo@davworld.net)
Date: Sun Sep 08 2002 - 21:31:54 EDT

• Next message: Robert Schwebel: "Re: [uClinux-dev] cs89x0 issue"
• Previous message: Maoyi Fan: "[uClinux-dev] FTP Server"
• Next in thread: Robert Schwebel: "Re: [uClinux-dev] cs89x0 issue"
• Reply: Robert Schwebel: "Re: [uClinux-dev] cs89x0 issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, All
 
I'm working on StrongARM SA1110 board with kernel 2.4.2-rmk-np3, I
changed the cs89x0's interrupt pin to GPIO1 on my new board. So I need
to modify the cs890x's device driver to make the net device work
normally. But I don't know where the cs89x0's drivers register the
Interrupt pin.
 
Can you give me a hint? Thanks!
 
Regards,
Aavan.
 
 


This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/

• Next message: Robert Schwebel: "Re: [uClinux-dev] cs89x0 issue"
• Previous message: Maoyi Fan: "[uClinux-dev] FTP Server"
• Next in thread: Robert Schwebel: "Re: [uClinux-dev] cs89x0 issue"
• Reply: Robert Schwebel: "Re: [uClinux-dev] cs89x0 issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Sep 19 2002 - 13:21:50 EDT