From: Asamanja Mallik (a.mallik@attbi.com)
Date: Fri Aug 30 2002 - 00:12:13 EDT
Yes that was the problem. It is now fixed. thanks -----Original Message----- From: owner-uclinux-dev@uclinux.org [mailto:owner-uclinux-dev@uclinux.org]On Behalf Of Ben Lau Sent: Thursday, August 29, 2002 4:52 PM To: uclinux-dev@uClinux.org; uclinux-dev@uClinux.org Subject: Re: [uClinux-dev] unable to download image.bin through serial port --- Asamanja Mallik <a.mallik@attbi.com> 的郵件內容：> > Hi all. > I just got my new AT91 ARM board and started playing > > with it. I have loaded the uClinux and also > configured > the mincom and managed to boot the board with it. I > am using uClinux 2.0.38 pre7. However I am unable to > > transfer file to my board trhu serial port. > I created a new image.bin file on my linux > workstation > and tried to transfer is to my board it shows it is > progressing > but even after 2 hour it still goes on. Heres the > detail of what I did: > > -> used fast mode on the board and used the rx (it > is > linked with rz) > -> changed my speed on minicom to 115200 > -> chose the image.bin file from my linux > workstation > -> the program starts receiving showing CCCCC > -> program goes on for a couple of hours still not > done > at the end I had to abort. > > The image.bin file size is 881468 bytes. > Do u sure do u hv sx/sz installed correctly? The "CCC" message told you that the rx program are waiting for data to come. _________________________________________________________ 好心分手，上一次流淚，明年今日，高妹... 火速下載至In手機鈴聲 Download the HOTTEST ringtones from Yahoo! http://ringtone.yahoo.com.hk This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/ This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/
This archive was generated by hypermail 2.1.4 : Thu Sep 19 2002 - 13:21:47 EDT