From: Vadim Lebedev (vlebedev@aplio.fr)
Date: Tue Jul 11 2000 - 12:46:15 EDT
Hi Dan, I've just updated the FAQ to include corrected intsruction how to build the compiler Your problem is that you should create symlunks to libgloss and newlibt in the egcs directory... The latest FAQ shows how to do it.... Of course you have to download and unzip the newlib tarball from my site... Vadim -----Original Message----- From: owner-uclinux-dev@uClinux.org [mailto:owner-uclinux-dev@uClinux.org]On Behalf Of Dan Carlson Sent: lundi 10 juillet 2000 20:05 To: uclinux-dev@geekcreek.net Subject: [uClinux-dev] ARM uCLinux and newlib Hello, I am having trouble building the cross compiler based on the instructions found on http://aplionet.aplio.fr/uclinux/uclinux-arm.htm and I think it is because I don't have newlib installed. This webpage does not discuss how to do that. Can anyone offer some suggestions? If you are familiar with the the build instructions found on this at this link you will notice that the targets defined for binutils and egcs are for target=arm-uclinux . Well, if I supply that same target for the newlib configure it tells me it is not a valid target. So I don't know what to do. Any help would be great. Dan This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/ This message resent by the uclinux-dev@uclinux.org list server http://www.uClinux.org/
This archive was generated by hypermail 2.1.4 : Thu Sep 19 2002 - 13:19:15 EDT